Ratings: 0

Step by step instructions

Using the Paper Trimmer, trim orange card stock down to 14 x 28 cm. Score at 14 cm and fold to obtain a squared card.

Cut from card stock a 4 x 14 cm strip (green), 2 x 14 cm (black) 1 x 14 cm (purple) strip, 2,5 cm square and a 5 cm square (yellow). Center and cut out a square from each yellow square.

Trim green strip along each side with Pinking Paper Edgers. Layer and adhere green, black and purple strips, yellow square together and onto the card a 1,5 cm from bottom edge.

Cut one oval and one star from black card stock using the Shapes ShapeTemplate, ShapeCutter Plus and craft mat to protect your working surface.

Using scissors, cut one star arm away to create triangle for top of witches hat and free-hand cut approx. 2,5 x 6 cm hat band out of purple card stock, trim and match this band to the bottom of star arm, slightly cutting curves along the top and bottom.

Layer and adhere pieces together to form a witch’s hat. Adhere hat to card.

With the Celestial 3-in-One Corner Punch, punch a sun, moon and star from the yellow cardboard and punch one sun from a scrap of black.

Trim two sun rays off the top and two off the bottom of black sun using the Micro-Tip scissors to create a little black spider.

Using tweezers (in the tool-taxi) to hold small paper pieces, apply adhesive with the tool-taxi glue brush and position sun, moon, star, spider onto the card.

Write your invitation text with the black pen & draw a thin web lines and thread from “Your Invitation text” to little black spider and pen your party information inside the card.

Add to my favourites